Page 6
For technical questions, please call 1-888-866-5797.
Item 62678
Installation
Read the entire Important Safety Information section at the beginning of this document including all
text under subheadings therein before set up or use of this product.
Safe can be mounted to floor, against wall or on wheels.
Installing to Floor or Against Wall
WARNING!
Verify that installation surface has no
hidden utility lines before drilling or driving screws.
1. Only install Safe on a stable, level, clean
and dry surface capable of supporting
the weight of Safe and its contents.
2. Remove liner from Safe.
3. Locate mounting holes on bottom
of Safe for floor installation.
Note:
Wheels should not be installed
if mounting to the floor.
4. Locate mounting holes on back of
Safe for installation against wall.
5. Using the Safe as a template, mark locations
of mounting holes on mounting surface.
6. Secure Safe with fasteners appropriate for the
mounting surface, which are rated to support
the weight of the Safe and its contents.
7. Replace liner.
Installing Wheels
1. Empty, close and lock Safe.
2. Tip Safe on its side.
3. Install four Wheels using Axles, Washers,
and Cotter Pins according to
Figure A.
4. Return Safe to upright position.
5. Move empty Safe to desired location.
Wheel
Axle
Cotter
Pin
Washer
Bottom Outside
Corner
Figure A
