Page 5
For technical questions, please call 1-888-866-5797.
Item 57039
Opening with Entry Code
Note: The Safe comes preset with a code of
1 - 5 - 9 - #
1. When opening the Safe first time, install battery
and press the following numbers and symbol on the
Keypad in this order:
1 - 5 - 9 - #
2. After entering the code, turn the handle clockwise
to open the door. Do this within 5 seconds of
entering the code or the locking mechanism will
reactivate and you’ll need to re-enter the code.
Note:
Keypad will disable for 20 seconds if Entry Code
is entered incorrectly three times in a row.
If the Entry Code is entered incorrectly three more
times the Keypad will disable for 5 minutes.
IMPORTANT!
After opening the door, change
the Entry Code to insure proper security.
Changing the Entry Code
Note: Leave door open while setting
Entry Code. Write down Entry Code and
store in secure place outside of Safe
1. Set your own Entry Code after opening
the door. Locate a small Red Button on
the inside of the door near the hinge.
2. Press the Red Button and release it. Two beeps
will sound and a yellow light will illuminate on
the Keypad. The yellow light will stay on for the
period of time you have to enter your new code.
3. Enter your new code which must be 3 to 8 digits long.
4. Confirm your new Entry Code by pressing
the
*
key on the Keypad.
• The Safe will beep twice and the yellow light
will flash twice if the Code has been accepted.
• The yellow light will flash three times and the
Safe will beep if the Code has not been accepted.
Note:
To turn off the “beep” sound of the Keypad,
enter
*
. To turn it back on, enter
*
.
5. Before closing the door, try the new Entry
Code to be sure the handle releases so it can
be turned and the side door bolts retract.
IMPORTANT: When opening the Safe in the
future, enter your Entry Code followed by #.
Closing
Keep closed and locked whenever unattended.
Check inside before closing.
Do not allow children to play with or near safe.
Keep keys and codes away from children.
Close Door and turn Handle counterclockwise
until it stops. If the handle is not turned
until it stops, the door is not locked.
Note:
The lock is deactivated for a few seconds after
entering a new Entry Code. Wait 6 seconds before
trying to lock the Safe after entering a new Entry Code.