Union Instruments INCA5011, Перевод оригинальной инструкции по эксплуатации

Страница: 12 / 67

Safety notes
12
2.2 Fundamentals of proper use
The process gas analyser serves to identify gases and their quality in biogas, crude
biogas, lean gas and biomethane.
Applications are biological process optimisation during motor control, controlling
preparation systems, analysing biogas, landfill gas and gas from purification plants.
The gas analyser is not suitable for determining the workplace threshold or lower
explosion limit.
In the case of toxic and explosive gases, observe the safety instructions at the
setup site.
The process gas analyser is permanently installed and is intended for use outside
closed rooms in a sufficient quantity of clean ambient air. Do not expose to direct
sunlight.
Any other use is considered improper. The manufacturer is not liable for the
resulting damage; the associated risk is borne by the installer, fitter, operator or
user. Only certified professionals may alter the process gas analyser (mechanical,
electrical or pneumatic modifications).
WARNING
Proper use includes following these operating instructions. In addition to the
following safety notes, always follow the safety instructions of the linked system
components.
Additional equipment or accessories that are not installed, delivered or
manufactured by UNION Instruments GmbH require the approval of UNION
Instruments GmbH as the manufacturer! Otherwise the guarantee expires.
2.3 Personnel and qualifications
Gas connections and work on the electrical equipment of the process gas analyser
may only be performed by a professional while observing safety regulations.