Union Instruments CWD2000 EX, Оригинальная инструкция по эксплуатации

Страница: 71 / 103

Operation
71
MB config is a binary coding for the measurement conditions while a measuring
range switchover is in process.
-1 measuring range not loaded
1 nozzle set 2 or nozzle set 1
2 air nozzle on or off
4 flammable carrier gas on or off
8 not flammable carrier gas (oxygen) on or off
16 flammable carrier gas that does not burn by itself on or off
The number 6 indicates that the measuring range is operated with nozzle set 1 and
a flammable carrier gas with an air nozzle.
The number 2 indicates that nozzle 1 has an air nozzle.
Calibration gas indicates the number of the calibration gas for the measuring
range. The upper nozzle set has number 1, the lower nozzle set the number 2.
No. indicates switchover point 1 and 2
Signal indicates the physical unit of the measurement value.
Value indicates the switchover point in the specified dimension between the
measuring ranges. In the example, the first measuring range is switched over at
650 +5% kcal/m3.
Window (%) indicates the overlap of the measuring ranges in %. In the example,
the hysteresis is 5 %.
Measuring range switchover can be done automatically or manually. If manual
measuring range switchover is set, an additional menu item appears under
Number 6.2.1.3.9. Change range. Here you do the manual switchover to another
measuring range.

non

automatic

manual
The time constant of the burner is a factor determined for every burner. Sewage
gas burners have another factor than burners for natural gas. Every burner type
has its own coefficient.
Max temp of inner pipe is a switch-off temperature if in case of a fault highly
calorific gas flows to a too large nozzle and generates a significant over-
temperature.