Union Community AC-7000 Скачать руководство пользователя страница 6

Страница: 6 / 75

AC-7000 User guide

㈜

Union Community / Hyundai Topics building 5

floor, 44-3, Bangi 2-dong,

Songpa-gu, Seoul, Korea (138-050)

Tel: 02-6488-3000, Fax: 02-6488-3099, E-Mail:[email protected]
http://www.unioncomm.co.kr

Before use

1.1. Safety precautions

Warning

Handling with wet hands or
allowing liquid to flow into it
is prohibited.

-> It may cause an

electric shock or damage.

Do not place a fire source

near the terminal.

-> It may cause a fire.

Do not  disassemble, repair,
or  modify  the  terminal  at
discretion.
->  It  may  cause  an  electric
shock, fire or damage.

Keep  out  of  reach  of
children.
->  It  may  cause  an
accident or damage.

If the above warning is ignored, it may result in death or serious injury.

Cautions

Keep away from direct
sunlight
->

may

cause

deformation

color

change.

Avoid  high  humidity  or
dust
->  The  terminal  may  be
damaged.

Avoid

using

water,

benzene,

thinner,

alcohol for cleaning

-> It may cause an electric
shock or fire.

Do not place a magnet
close to the terminal.
-> The terminal may
break

down

malfunction.

Do not contaminate the
fingerprint input area.
-> Fingerprints may not be

well recognized.

Avoid using insecticide or
flammable spray near the
terminal.
-> It may result in
deformation

color

change.

Avoid impacts or using
sharp

objects

the

terminal.
-> The terminal may be

damaged and broken.

Avoid severe temperature
changes
-> The terminal may be

broken.

- If the above cautions are ignored, it may result in property loss or human injury.

※

Under no circumstances will UNION COMMUNITY be responsible for accidents or

damages caused by inappropriate use of the product without referring to the user
manual.

Содержание AC-7000











































































Результаты поиска

Содержание AC-7000

Отзывы:

Похожие инструкции для AC-7000

Бренды по названию

Популярные бренды

Union Community AC-7000, Руководство пользователя

Результаты поиска

Содержание AC-7000

Отзывы:

Похожие инструкции для AC-7000

Бренды по названию

Популярные бренды