Union Audio Orbit.6, Руководство пользователя

Страница: 22 / 28

22
Orbit.6 is powered by the external Hybrid Linear power supply unit (PSU)
“ Europa ”. Each Europa PSU is factory configured for the specific mains voltage
for the location where it is used, and is available in three versions; 100VAC
(JAPAN ONLY), 115VAC, and 230VAC.
Please ensure you specify the correct
mains voltage when placing your order for the Orbit.6
Europa has three outputs, +16V and - 16V providing power for the mixer ’ s
analogue audio circuitry, and +12V to power the valve heater elements.
The two analogue rails are fully linear and are derived via a high quality toroidal
transformer, bridge rectifier, smoothing, and dual discrete regulators. These
analogue power rails are extremely quiet with a typical wide
- band output noise
level of < - 85dBu at the rated output of 1 amp.
The analogue power rails are fully protected against short circuit and
overvoltage, and each rail has its own visual status indicator; Green for good,
flashing Amber for overheat warning, or flashing Red in the event of a
shutdown.
The 12 volts for the valve heaters is derived from a compact switched mode
power supply module, ensuring high efficiency and maximum reliability.
WARNING - To prevent the risk of fire or electric shock do not
operate the Europa PSU near water or in locations where it is likely
to be exposed to rain or moisture.
Always ensure the Europa has adequate ventilation, and if operated in high
ambient temperatures consider additional measure to aid cooling, such as a
small desktop fan.
Europa Power Supply