11. Remove the two screws from the wiper blade.
Remove the blade.
12. Clean out all the waste toner from the hopper.
Make sure the seal are clean.
13. Install the cleaned or new wiper blade and two screws.
14. Install the two PCR holders.
XEROX WORKCENTRE 3210
•
3220 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2011 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
