33. Install the new chip and cover.
Insert the two small screws that correspond to the holes drilled to hold everything in place.
REPETITIVE DEFECT CHART
Upper heat roller:
77.6 mm
OPC drum:
75.5 mm
Lower pressure roller (1st):
62.8 mm
Lower pressure roller (2nd):
37.7 mm
Supply roller:
47.1 mm
Transfer roller:
47.0 mm
Developer roller:
35.2 mm
PCR:
26.7 mm
XEROX WORKCENTRE 3210
•
3220 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2011 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
