2. Release the back portion of the cover by lifting the cover
over the tabs (as shown).
3. Release the front portion of the cover by prying of the left
side of the cover first then the right side.
4. Remove the doctor blade by first removing the two screws
that hold it in place (as shown).
5. The blade is not free yet, you will need to peel off and clean
the sealing foam that is adhered to the blade shown (
A
).
You also need to remove and clean the sealing foam that runs
along the back edge of the cartridge (
B
).
Clean both sealing foams thoroughly, using a vacuum or com-
pressed air, and set aside.
NOTE
: Be careful when using a vac-
uum, as the foams can easily get sucked into it.
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
OKIDATA C5500/5600/5700/5800/5900/6000/6100 CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Summit Technologies is a division of UniNet Imaging Inc.
w w w.
u n i n e t
i m a g i n g . c o m
USA
•
UK
•
EUROPE
•
AFRICA
•
JAPAN
•
CHINA
•
BRAZIL
•
MEXICO
•
COLOMBIA
•
ARGENTINA
•
VENEZUELA
11124 Washington Blvd., Culver City, CA, U.S.A. 90232
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
A
B
