24. Remove the toner sensor cover by simply pulling it off.
25. Using a cotton swab and alcohol, clean the reflective area
of the toner sensor. This will lower the risk of a “toner sensor
error” message.
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
OKIDATA C5500/5600/5700/5800/5900/6000/6100 CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Summit Technologies is a division of UniNet Imaging Inc.
w w w.
u n i n e t
i m a g i n g . c o m
USA
•
UK
•
EUROPE
•
AFRICA
•
JAPAN
•
CHINA
•
BRAZIL
•
MEXICO
•
COLOMBIA
•
ARGENTINA
•
VENEZUELA
11124 Washington Blvd., Culver City, CA, U.S.A. 90232
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
22. Before installing the small end cap you will need to install
a new reset fuse in order to reset the page count. First modify
the fuse to fit. Using a small flat head screwdriver, press the
fuse wire between the two copper contacts as far as they can
go.
NOTE
: Starter drum units will not have an installed fuse.
23. Install the small end cap on the cartridge as shown.
NOTE
: the you will need to make sure all the components are
aligned correctly in order for the end caps to fit. Jiggling of the
cartridge might be necessary.
