25. Note: Before reinstalling the the plastic cover, you must
first install a new fuse to reset the counter and avoid any error
messages. Use Uninet Reset Fuse #9362.
26. Use a small screwdriver to lift open the toner fill plug.
27. Toner plug lifted.
28. Using a thin needle or small hook tool, pry off the plastic
adhesive tab from the waste hopper openings (two holes)
shown. This is where the waste toner will dump out during
cleaning.
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
OKIDATA C5100 CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Summit Technologies is a division of UniNet Imaging Inc.
w w w.
u n i n e t
i m a g i n g . c o m
USA
•
UK
•
EUROPE
•
AFRICA
•
JAPAN
•
CHINA
•
BRAZIL
•
MEXICO
•
ARGENTINA
•
VENEZUELA
11124 Washington Blvd., Culver City, CA, U.S.A. 90232
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
