21. Remove the Wiper Blade by first unscrewing the two
screws located on each end as shown.
22. Pry the Wiper Blade out of the clip where it is being held
from.
23. Wiper Blade removed.
24. Clean using air pressure. Reassemble when done.
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
BROTHER 1240/1650
•
DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC.
•
OKIDATA C5100 CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Summit Technologies is a division of UniNet Imaging Inc.
w w w.
u n i n e t
i m a g i n g . c o m
USA
•
UK
•
EUROPE
•
AFRICA
•
JAPAN
•
CHINA
•
BRAZIL
•
MEXICO
•
ARGENTINA
•
VENEZUELA
11124 Washington Blvd., Culver City, CA, U.S.A. 90232
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
