Quick Start Guide
1. Remove the packing materials
and check the components.
* Please note the blue handle on the white cartridge is already in the locked position *
2. Remove the fuser lock.
for the iColor 500
4. Using the provided USB drive “UniNet iColor Software”, install the driver.
Only connect the Printer to the PC when prompted to by the software.
6. If purchased, install the iColor TransferRIP software and insert the
dongle into an available USB port. The software is located on the
“UniNet iColor Software” USB Drive.
When prompted, enter the Update Code.
Your code is in a text file on the “UniNet iColor Software” USB Drive.
Please copy and paste the entire string of code. The date below
will automatically populate. Then click “Close”.
www
.icolorprint.com
3. Uninstall the cartridges to remove the protective orange film from each. Lock the blue lever forward. Reinstall the cartridges.
5. Connect the power cord and USB cable to the printer. Power on the printer.
3232 W. El Segundo Blvd, Hawthorne, California 90250 - [email protected] www.icolorprint.com
