pg. 4
UNINET DTF 100
GENERAL SAFETY PRECAUTIONS
Make sure to read this information before setting up the machine and keep it handy for future reference. Do not attempt
to use the machine in any way that is not described here or in the accompanying manuals. Misuse may result in unexpected
accidents, fires, or electric shock.
The process of heat transfer of textile ink to the film can be done on a variety of fabrics such as cotton and polyester. When
printing using a DTF or DTG printer, you will first need to print to the DTF sheets / film. Then, add DTF powder to cover the
print before curing. Wear protective masks when operating your DTF equipment and processes and operate in a well
ventilated room with a filtration system.
The following are instructions that, if ignored, could result in serious
personal injury. These instructions must be followed for safe operation of
the machine.
CHOOSING A LOCATION
•
Do not place the machine close to flammable solvents such as
alcohol or thinners.
•
Do not install the machine in a location that is unstable or
subject to excessive vibration.
•
Do not install the machine in locations that are very humid
or dusty, in direct sunlight, outdoors, or close to a heating
source.
•
Do not place the machine on a thick rug or carpet.
•
Do not place the machine with its back attached to the wall.
POWER SUPPLY
•
Use the power cables included with the machine.
•
Connect the machine to the specified power source(s).
•
Never attempt to plug in or unplug the machine from the
power supply when your hands are wet.
•
Always push the plug all the way into the power
outlet.
•
Never damage, modify, stretch or excessively bend or twist the
power cord. Do not place heavy objects on the power cord.
•
Never plug the machine into a power socket that is shared
with other equipment (extension lead/cord, 2- or 3-way
adapter, etc.).
•
Never use the machine if the power cord is bundled
or knotted.
•
If you detect smoke, unusual smells or strange noises around
the machine, immediately unplug the machine at the power
supply and call for service.
•
Periodically, unplug the machine and use a dry cloth
to wipe off any dust or dirt collected on the plug and the
power outlet.
•
If the machine is placed at a location exposed to a lot
of dust, smoke, or high humidity, the dust collected on the
plug absorbs moisture and may cause insulation failure
and fire.
•
If you hear thunder, disconnect the power supply of the
machine and refrain from using it. Leaving the machine
plugged in may cause fire, electric shock, or damage to the
machine, depending on the thunder storm.
•
Ensure that the area around the power outlet is kept
clear at all times so you can easily unplug the power
cord if necessary.
•
Never remove the plug by pulling on the cord. Pulling
the cord may damage the power cord, leading to
possible fire or electrical shock.
•
Do not use an extension lead/cord.
CLEANING THE MACHINE
•
Always unplug the machine from the power outlet
before cleaning the machine.
•
Use a damp cloth to clean the machine. Never use
flammable solvents such as alcohol or thinners.
•
If flammable solvents come in contact with
electrical components inside the machine, it could
cause a fire or electric shock.
•
If you accidentally switch the machine on while
cleaning it, you could injure yourself or damage
the machine.
MAINTAINING THE MACHINE
•
Do not attempt to disassemble or modify the
machine. There are no user serviceable parts inside
the machine.
•
The machine contains high-voltage components.
•
Never attempt any maintenance procedure not
described in this information.
•
Do not connect other than recommended devices to
a connector on the machine (the cable connector or
the USB port etc.). It could cause a fire or electric
shock.
WORKING AROUND THE MACHINE
•
Do not use highly flammable sprays near the
machine. This could cause a fire or electric
shock if the spray comes into contact with
electrical components inside the machine.
•
This product emits low level magnetic flux. If you
use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult
your doctor.
