Requirements for personnel
The product may only be installed, operated,
maintained, repaired or dismantled by appropriately
qualified personnel. All qualified personnel must have
read and understood this instruction manual.
Checking the product
In accordance with the safety directives, the operating
company must subject the product to thorough
checking prior to putting it into operation; after carrying
out repairs, and after malfunctions have occurred.
To ensure the right functionality of the product, it must be
handled with care. It is not allowed to put any tools or any
other items which can cause damage to the product on the
product. The product must be protected against any liquid
that can cause damage to it.
For information on the conditions in which the product can
operate, please see the section “Operating conditions” or
contact us. If the product isn’t in use, place it in a dry, clean
environment and cover it to prevent any damage.
SAFE OPERATION
The product must not be put into service until the final
machinery into which it is installed has been declared in
conformity with the provisions of the machinery directives,
where appropriate. Each operation of the product that is
not in compliance with its intended use can lead to the
product being damaged, or can cause accidents and at
the same time stoppages in production. To ensure a safe
operation, please refer to this instruction manual and the
operating manual of other machinery, where the product is
to be incorporated.
GENERAL SAFETY INSTRUCTIONS
MODIFICATION OF THE PRODUCT
The product must not be modified without our written
consent. Any such unauthorized modification will make
void our liability in respect of the product. The operating
company may only carry out the maintenance and repair
work detailed in this instruction manual.
LABELS AND NOTICES
All notices and labels attached to the product must be
fully visible and must not be removed. They must ensure
compliance with all the instructions contained on them.
Damaged or illegible notices and labels must be replaced.
WARRANTY
The warranty conditions are laid down in the terms and
conditions of delivery and payment issued at the time of
order. Warranty cover will be annulled if:
•
the product is not operated in accordance with the stipu-
lated regulation use,
•
the instructions set out in this operating manual are not
followed,
•
the product is modified without the consent of the manu
-
facturers,
•
the screws sealed by locking varnish are unlocked.
The manufacturer’s warranty in respect of maintenance
and repair work applies only if original replacement parts
are used.
MAINTENANCE AND ASSEMBLY INSTRUCTIONS / MCE AND MSCE MINI ELECTRIC CYLINDERS AND SLIDERS
PRODUCT DESCRIPTION
In order to improve the products in this catalogue the specifications are subject to change without notice.
