9
5.13. e-Sata 1EA
- e-STAT connector for the external HDD
6. Basic Operation
6.1. Power ON/OFF
6.1.1 Power ON
- When you plug in the product, the POWER LED turns green to indicate power is supplied to the
DVR stably. According to HDD capacity, there can be a time difference in booting. While booting
is going on, the progress bar at the bottom indicates booting status. When booting is complete,
OSD (On Screen Display) is displayed. Then, the user can operate the DVR at his/her discretion.
6.1.2 Power OFF
- Press SHUTDOWN in the system menu to turn off the DVR. When the password window appears,
enter the user password (default: 111111) to shut down the DVR. After the shutdown message,
remove the adapter cable from the rear panel.
6.1.3 Date and Time Setting
- Enter the date and time to the DVR system. Then, go to Date/Time and press OK to apply
entered date and time.
6.1.4 ID and Password Setting
- Set the user ID and password for the DVR system.
6.1.5 Network Setting
- Select the network type setting in the menu. STATIC, DHCP and DDNS are supported.
