USER GUIDE
You can configure the groups so that they are on listen (scanned groups), so that you will
receive all the communications of the groups with this status. You can configure this by
2
4
/ 2
9
7
BASIC FUNCTIONS
7.1
Group calls
Group calls allow you to communicate with a group of users who have the option to participate
in the communication enabled, by attaching the groups into the network.
The groups are organized into folders. Each folder may have a variety of groups, the group
distribution is programmed.
The name of the group you have selected appears on the LCD screen. You can change the
different groups in the lists of group use a F1 or F2 button.
To change the folder, access the Group menu.
Once you have selected the chosen group, press PTT to initiate the call. You will bear an
acoustic warning and the indicator light will turn red when the network has given permission
for transmission. Whenever you wish to stop speaking, release the button.
The terminal always shows the progress of the call and the identity of the speaker.
To disconnect the call, press the ‘F4’ key, or simply release the PTT and wait for the system to
disconnect the call.
To optimize the sound quality of the terminal, ensure that the terminal is vertical with the
antenna pointing upwards, between 2.5 and 10cm from your mouth, while you are
pressing the PTT.