FIGURE 1
FIGURE 2(A)
FIGURE 2(B)
UNPACKING/ASSEMBLY
Check that correct number of components has been supplied, as in FIGURE 1.
Check that the apparatus is complete, undamaged and correctly assembled. Any damaged or defective parts must be replaced before use.
1.
Open U21014K unit and check the spark arrestor, pre-filter and filter, FIGURE 2 (A).
2.
Replace the filter back into the casing if it’s in good condition. FIGURE 2(B).
i.
Place the spark arrestor into the filter cover.
ii.
Place the pre-filter into the above combination.
iii.
Place the filter into the above combination.
iv.
Click the above combination into the Turbo unit.
NOTE: Make sure that the filter is properly placed into the casing while installing.
WARNING: The filter can only be fitted to the turbo unit.
DO NOT directly fit the filter to the helmet/hood.
PAPR Welding Helmet Manual |
7
PAPR WELDING HELMET
0432 PAPR Manual MAR21.indd 7
0432 PAPR Manual MAR21.indd 7
10/03/2021 2:19:52 PM
10/03/2021 2:19:52 PM
