20
RAZOR COMPACT 250
OPERATING MANUAL
WARNING!
Maintain positive control of the loose end of the wire or leave it tensioned into the catch hole on the side of
the spool at all times. If the wire becomes too unravelled, the spool of wire can become unusable.
9.
After ensuring the required setup has been completed
for the wire you wish to run it is now time to install the
wire. You can begin to install the spool by loosening
and removing the spool holder retainer nut (clockwise
to loosen).
10.
With the spool holder retainer nut removed, slide the
spool onto the spool holder. Ensure you line up the key
hole on the spool with the key on the base of the spool
holder.
11.
You can now lock the spool of wire in place by
reinstalling the spool holder retainer nut (anti-clockwise
to tighten).
12.
With the wire spool installed, begin feeding the wire
into the inlet wire guide. Maintain positive control of the
wire at all times as it is coiled under tension. Ensure the
upper roller assembly is in the upright position.
RAZOR Compact 250 Manual APR23.indd 20
RAZOR Compact 250 Manual APR23.indd 20
6/04/2023 4:03:05 PM
6/04/2023 4:03:05 PM
