•
Place the nail's head inside the magnet case (22).
•
Hold the nail in your left or right hand as you would do when using normal hammer.
•
Hold your machine in other hand and place it straight over the nail's head.Then release the nail.
•
Slowly press the pneumatic hammer on the nail's head.
•
The machine will start automatically drive the nail into the surface.
•
When the nail is completely hammered in and out of reach of the hammer, the machine will shut off
automatically.
•
Repeat the process to nail other nails down.
TROUBLESHOOTING
•
If you experience sudden air pressure fall, the inner mechanism may get stuck in a middle position and
the air may blow through but the machine will not work.
•
This is will not cause any damages and it is not considered as malfunctioning.
•
To stop the air from escaping, clap the machine against the palm of the other hand (note 2). It is
prohibited to clap the machine against hard surface such as wood or metal, brick, concrete etc.
The upper lid may crack. Such damages are not covered by the warranty.
•
This action will stop the air from escaping and the functionality of your machine will be restored.
•
Keep your device clean. Dirt may enter the inner mechanism of your machine and cause damage.
•
Do not use aggressive cleaning solution or paint thinners to clean the machine.
•
Clean plastic parts with cloth dipped in soup water.
•
Clean and lubricate metal surfaces with a cloth dipped in paraffin oil.
•
If you are not using your machine, lubricate it with suitable grease and store it in a dry place to prevent
corrosion.
Lubrication
•
Use only special oil designed for lubrication of pneumatic systems.
•
Do not use other oils or lubricants.
When the operational life of your device is over, dispose off it in accordance with valid rules and regulations.
Your product is made of metal and plastic parts that may be recycled when separated.
1. Disassemble all parts.
2. Separate all parts according to the material they are made of (e.g. metals, rubber, plastics, etc.).
Take the separated parts to the recycling facility near you for further processing.
Information about the location of recycling centres may be found at your local City office or throughout an
Internet search.
6
MAINTENANCE
DISPOSAL
7
???
If the machine breaks down, send it back to the vendor for quick repair.
Please, enclose brief description of the defect. That makes repair easier. If the machine is still covered by
warranty, enclose the warranty card and proof of purchase receipt. After the warranty period expires, we
repair your machine for a special price.
To prevent possible damages during shipping, packed the machine carefully or use the original packaging
material. We are not liable for shipping damages due to incorrect packaging of your machine. If making
a claim at the shipping company the level and method of packaging plays a major role during claim evaluation
process.
Note:
Pictures and contents in this manual may slightly differ from the actual product or accessories.
It is due to continuous improvement of our products. Such small differences have no effect on the product
functionality.
CAUTION
