Unimac ATOIMPUMCA12V Скачать руководство пользователя страница 8

Страница: 8 / 9

12V Adjustable Torque ½" Drive Impact Wrench / Rattle Gun

E&OE

Maintenance and Troubleshooting

Disconnect the tool from the electrical supply

before performing any maintenance. • The

machine should be cool enou

gh to touch before performing maintenance activities. • Some

maintenance activities described may be beyond the scope of some users. For procedures that you are not
comfortable with or have the tools, knowledge or experience for, have the unit serviced by an authorised
service centre or qualified technician.

•

Clean the tool regularly with a soft cloth

– do NOT use water, solvents, abrasives etc. Remove any

debris from the drive pin and tool ventilation slots using a soft brush.

Fuse Replacement

The tool is fuse protected against motor damage if
there is an excessive current draw. If the fuse is
"blown", the tool cannot be used until the fuse is
replaced:

1. Unscrew the terminal (

) of the cable 12VDC adaptor (

2. Remove the fuse (

) from the adaptor. If the filament in the fuse is broken, the fuse is "blown".

3. Insert the replacement fuse (15A) into the adaptor and screw the adaptor terminal back on.

Troubleshooting

The following information may assist in identifying a problem and rectifying it.

Tool will not operate.

Possible Fault

Action

No electrical supply

Ensure that the electrical supply to the tool is correct (12VDC) and that the vehicle battery is
sufficiently charged. Note that some vehicles may require the ignition set to "on" or "accessories" to
provide power through the cigarette lighter / 12VDC connector. Ensure that all connections are secure.

Fuse blown

Replace the fuse

Fasteners too tight or not tight enough.

Possible Fault

Action

Incorrect torque setting

Ensure

torque setting

is correct, and wait for "end" to display to ensure set torque is reached.

Specifications

Electrical Requirements

12VDC

Drive Pin Size

½" Square Drive

Torque Range

80 to 340 Nm

Fuse

15A Automotive "Cartridge" Type

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC