EN
03
(1)
(2)
03
Installation Instructions
Step1: Take out the filter
Step 2. Clean the filter
(1) Remove the lid and the reservoir. Fill the tank halfway with cold tap water. Soak the filter
in the water about 5 minutes.
(2) Take out the filter and empty the water in the tank. Put the filter into the reservoir and press
firmly to ensure a tight seal.
(3) Put the reservoir into the tank. Fill the reservoir with cold tap water till the reservoir is full.
(4) Wait till the water in the reservoir go through the filter and discard the first three cups water.
(1) Wash your hands, then take out the filter of the filter bag.
(2) Tear off the stickers on both sides of the filter.
(1) Empty the water in the reservoir.
(2) Rinse the tank, reservoir, and lid with cold tap water.
Step 3. Wash the device
(1)
(2)
(1)
(2)
(4)
×3
(3)
The filter may float on the water, which is normal.
Please hold the lid or reservoir in your hand when pouring out water.
A trace of carbon power might be observed in the bag due to the impact and friction during
transportation. Please assure that will not affect the performance and use of the product, and wash
the filter according to the instructions in the manual.
