Unilever Pure it CU3040, Инструкция по эксплуатации

Страница: 4 / 32

- 6 -
EN
Product Structure
Filter Element Life Identi fi cation and Purchase
1
2
3
4
5
6
7
8
9
10
11
12
13
(
The picture is for reference only, and the real product shall prevail)
1. Carbon fi lter
2. Top cover
3. Inlet faucet
4. PVC soft tube
5. Inlet
fi tting
6. Silica blocker
7. Output
fi tting
8. Adapter fi tting
9. Foundation
10. Cover mounting
11. Filter cover
12. Output faucet
13. UF
fi lter
Carbon rod fi lter element (CTO carbon)
(
Recommended replacement cycle: 6 months)
UF membrane fi lter (UF membrane)
(
Recommended replacement cycle: 1years)
Note:The recommended replacement cycle is for reference only, and the speci fi c replacement cycle is determined based on the
local water quality and water consumption of users.
- 7 -
EN
Scope of Application
The machine is applicable to household and similar places.
(
The picture is for reference only, and the real product shall prevail)
Replacement of Filter Element
Filter life span depending on the local water quality & pure water production, replace it when it comes to the following
condition:
1) Puri fi er output reduces clearly or it tastes bad
2) Total quantity of pure water is reached or it comes to replacement cycle.
Filter replacement steps as below:
a. Screw the old fi lter anti-clockwise, as shown in pic.a
b. Remove the new fi lter protective fi lm and aim it to the fi lter mounting seat, press it and screw it in clockwise. As
shown in pic.b
c. After fi lter is replaced, let it work for a while. Drink water till it's normally working.
(
pic.a)
(
pic.b)
When replacing the CTO fi lter, please follow the "Quick Start Guide" steps on the fi rst page to carry out the
fi lter transposition, rinse and reset operations.