Unilever Pure it CU3040, Инструкция по эксплуатации

Страница: 3 / 32

- 4 -
EN
2) External thread faucet connection, only for M22X1 thread connection.
3) Internal thread faucet connection, only for M24X1 thread connection.
Seal ring gasket
Faucet adapter fi tting
3. Whole machine installation
- 5 -
EN
4. Whole machine instructions.
When fi rst time to use this puri fi er, put the puri fi er upside down and adjust the faucet ball valve to make water fl owing. Let
water entering the fi lter slowly toempty the air.When there is water coming out of the puri fi er, put puri fi er back to the regular
position and operating for 5 to 10 min, till output water is clean.Normally, just turn on the tap to get water. If need to use tap
water, switch the faucet ball valve to the inlet faucet. If don't use the machine for a long time, you should let it work for a while
before regularly drinking.
When inlet tap is like pic.1, it provides tap water. When it is like pic.2, it pro-vides pure water.
Quick Start Guide
Following operations should be taken when the product is used for the
fi rst time.
Filters transposition: remove the CTO and UF fi lter from the machine, change the positions of 2 fi lters and install
them.
Rinse the
fi lters: put the machine upside down, adjust the inlet faucet ball valve to make water fl ow into the machine,
keep water fl owing out of the machine faucet for 5 to 10 minutes until the outlet water is clear and odor-free.
Restore the fi lter positions: turn off the water source, put the machine upside down and remove the CTO and UF
fi lter, install them in the original position on the machine, and then straighten the machine.
(
The picture is for reference only, and the real product shall prevail)
(
The picture is for reference only, and the real product shall prevail)
(
The picture is for reference only, and the real product shall prevail)
(
The picture is for reference only, and the real product shall prevail)
(
The picture is for reference only, and the real product shall prevail)