Page 22
Version 2.0
User Manual Tea Fusion
09/2013
9
Decommisioning
Decommisioning may have two reasons:
●
Moving the machine to another location.
●
Final disposal.
NOTE
If the Tea Fusion machine is to be set up again at a different site, decommisioning must be well
prepared. All construction and attachment parts must be carefully disassembled, marked and, if
required, packed for transport. This warrants that all parts are correctly assigned again and can
be installed properly.
1 Interrupt water supply to Tea Fusion machine.
2 Perform short rinsing by inserting an empty capsule and pushing both product selection buttons
simultaneously to empty the air-break tank.
3 Switch off the machine.
4 Disconnect the machine's water connection line to the water supply.
5 Empty waste bin.
6 Unplug the machine.
7 Clean the machine.
8 Preferably pack the machine in the original box before shipping. In case the original box is has been
disposed ensure the packaging protects the machine from damage and/or moisture.
10 Disposal
10.1 Safety
WARNING
Poisoning of the environment and ground water by improper disposal!
When disposing of machine parts and equipment, the provisions and directives of the legislator
in the operator’s country must be complied with.
10.2 Disposal
NOTE
Please contact your machine service provider for proper disposal of the machine.
The machine is subject to the electronic waste regulation (WEEE/EU directive) and must not be
disposed of in domestic waste.
■
Sort the components of the Tea Fusion machine by recyclable materials, hazardous materials and
operating materials.
■
Dispose of the sorted components of the Tea Fusion machine using a suitable recycling facility.
