Uniks ISO-5, Руководство по эксплуатации

Страница: 22 / 65

22
min sec
button button
Interval = test time/5
In the fi rst interval a test voltage of V/5 volts is applied to the DUT where V is the voltage
selected in the control window. At the end of each interval the test voltage is increased by V/5
volts. So in the last interval the test voltage will become V volts. The value at the end of each
interval is stored by the meter.
The steps to take a test in STEP mode are as follows:
⚫
To enter the step mode press the icon on the home screen and following screen
will be displayed.
⚫
To setup the basic settings of the mode press the icon. The control window will
appear as shown below.