GHOST METER F
55
5.11.
Using RANGE
•
Press the RANGE key to activate the manual mode and to disable the Autorange
function.
•
The message “Manual Range” appears on the upper
left part of the display instead
of “Auto Range”.
•
In manual mode, press the
RANGE
key to change measuring range: the relevant
decimal point will change its position.
•
The
RANGE
key
is not active in positions “
” In Autorange
mode, the instrument selects the most appropriate ratio for carrying out
measurement.
•
If a reading is higher than the maximum measurable value, the indication “O.L”
appears on the display.
•
Press and hold the RANGE key for more than 1 second to exit the manual mode
and restore the Autorange mode
5.12.
HOLD Mode
•
To freeze the display for any function, press key HOLD.
•
And again press key HOLD to release freeze
