Uniks C6, Руководство пользователя

Страница: 12 / 28

12
4. Tap " INRUSH " button to start the inrush current measurement function.
Caution:
△ It is impossible to measure if clamping multiple wires at the
same time.
△ If the measured current range is unknown in advance, please
set the function range switch to the maximum range, and then
gradually reduce the range until a satisfactory resolution is
achieved.
3.5 Resistance measurement
1. Insert the red probe into the " INPUT " terminal and the black probe into
the " COM " terminal.
2. Set the function range switch to " " position, tap the " SEL " key to
switch to " Ω " function, and connect the probe to the measured
resistance.
3. Read the measurement result after the reading is stable.
Caution:
When the measured resistance value exceeds the
maximum range, the instrument with higher range
shall be selected.
When checking the in-circuit resistance, the power
supply of the circuit to be tested must be cut off and all
capacitors must be fully discharged.
When measuring the resistance above 1M

, it may
take several seconds for the reading to become stable,
which is normal for high resistance measurement.