UNiKA UD-064 & UD-064D Switching Power Amplifier
Dante interface.
Dante in Upgrading: Dante interface is in a process of software upgrading. Please wait for the upgrade
to complete and then re-power the amplifier.
Upgrade Done: The Dante interface of the amplifier has just completed a process of firmware upgrade.
Please re-power the amplifier.
Dante not OK: It means that Dante interface is not ready for operation. This can happen if you re-
powered on the amplifier immediately right after it was powered off. You may have to turn off the
amplifier again and wait for a couple of seconds to re-power it to let the Dante interface get a complete
recycle restart.
Most of the time, you can simply press the BACK button to ignore the error/service message even if the
power supply of the amplifier has been shut down for protection. However, a similar error/service message
may pop up again if an even worse condition occurs. For example, a message of a fan stuck at 1.2KRPM
may pop up after you ignored a message of a fan stuck at 1.5KRPM.
Overview Description Getting Started
Configurations
eXtraTone & LPF In & Out Dante Applications Specifications Warranty
