UNiKA UD-064 & UD-064D Switching Power Amplifier
Device Configurations:
Long pressing the INFO/SET button more than one second will bring up the SETTINGS menu. You can
browse the content SETTINGS menu by rotating the ENCODER. Once you find the item you wish to
change the value of it, switch the ENCODER to edit mode by pressing the ENCODER on the selected item.
You will see a flashing edit bar under the selected item to indicate that the item is now editable. You can then
rotate the ENCODER again to change the value of the selected item to whatever you need. Once you feel
O.K. for the change to the item, simply press the ENCODER again or press the BACK button to leave the
edit mode.
TIP:
The above operations can be completed in a very swift way. Simply press and hold the
ENCODER on the selected item and simultaneously rotate the ENCODER to change the value of
the selected item. Release the ENCODER once you O.K. the new change. The ENCODER and the
selected item will automatically exit edit mode after you release the ENCODER.
Here is the list of items in the SETTINGS menu,
PAR1&2:
Input1 and Input2 are parallelized. And both
channels are fed by Input1 via XLR1. XLR2 is
disconnected internally to avoid unconscious noise
coupling.
PAR3&4:
Input3 and Input4 are parallelized. And both
channels are fed by Input3 via XLR3. XLR4 is
disconnected internally to avoid unconscious noise
coupling.
PAR1~4:
Input1, Input2, Input3, and Input4 are all parallelized. And all channels are fed by Input1 via
XLR1. XLR2, XLR3, and XLR4 are all disconnected internally to avoid unconscious noise coupling.
NOTE:
Three small indicators on the left of the display show up to remind users how inputs are
parallelized.
Turning on PAR1~4 will forcely disable PAR1&2 and PAR3&4 automatically.
PAR1~4 can turn on along with BTL1&2 and BTL3&4. In this circumstance, however, both
bridged BTL outputs are sourced from Input1 via XLR1 only.
BTL1&2:
Output1 and Output2 are bridged to output.
Output2 is driven by the inverted audio from Input1.
Since both Output1 and Output2 are routed to
speakON1 socket, users can get bridged output from 1+
and 2+ contacts of the socket. XLR2 is disconnected
internally to avoid unconscious noise coupling.
BTL3&4:
Output3 and Output4 are bridged to output.
Output4 is driven by the inverted audio from Input3. Since both Output3 and Output4 are routed to
speakON3 socket, user can get bridged output from 1+ and 2+ contacts of the socket. XLR4 is
disconnected internally to avoid unconscious noise coupling.
NOTE:
Two small indicators on the left of the display show up to remind the user how outputs are
bridged; while the user can also tell the bridge configuration from the combined bars of PPM
meters on the right of the display.
Please be informed that BTL1&2 and PAR1&2 are exclusive to each other which means
enabling BTL1&2 automatically disabling PAR1&2, and vice versa.
Overview Description Getting Started
Configurations
eXtraTone & LPF In & Out Dante Applications Specifications Warranty
