Page 4
8. AUXILIARY INPUT (AUX. IN)
It allows you to input an external signal such as a CD player, etc. with 225mV line output through the use
of a ¼ "monaural phone plug. The level of this signal will be determined by the effect gain control (level).
9. CONTROL OF AUX-IN & EXTERNAL EFFECT RETURN LEVEL (FX LEVEL)
It acts on the auxiliary signal input IN and on the input signal of FX return. These signals can be
equalized and injected directly into the master stage.
10. RETURN OF EFFECTS (FX RETURN)
External Effect signal input through the use of a ¼ "monaural phone plug, the input level will also be
determined by the Effect level control of the master section.
11. SIGNAL OF INPUT CHANNELS THAT SENDING TO EXTERNAL EFFECT UNIT (FX SEND)
It allows you to extract independent signal from each channel to be injected into an external effects
processor using a ¼ "monaural phone plug. The magnitude of the signal is determined by the effect
control of each channel selected to be sent to the processor.
12. POWE ON LIGHT INDICATOR (ON)
It will illuminate when the switch on the back of the console is enabled in position switched on.
13. CLIP INDICATOR (CLIP)
Illuminates when the amplification stage of the console is causing a level of audio distortion. To avoid
such distortion, reduce the output level with the master gain control of the master section, or with the
level controls of each input channel.
14. RECORDING OUTPUT (TAPE OUT)
It delivers the audio signal coming from the mix of all input channels to an external audio recorder, this
signal is sending from the pre-equalizer of the master section.
15. 7-BAND GRAPHIC EQUALIZER (EQ)
Master output Graphic Equalizer, it allows better sound quality by accentuating or attenuating
frequency signals, the frequency bands of 60Hz, 150Hz, 400Hz, 1KHz, 2.5KHz, 6 KHz and 15KHz in an
adjustable range of +/- 12dB.
DIGITAL ECHO EFFECT
16. DELAY TIME CONTROL (TIME)
It controls the time elapsed between the repetitions of the signal obtained from any of the input
channels. Turning to the minimum position gives the reverb effect. The operating range is between 20
and 160 milliseconds.
17. DEPTH CONTROL (DEPTH)
Adjusts the number of times the original sound from any of the main channels is repeated. Turning to the
maximum position gives an echo effect.The Depth controls effect the amount of delayed signals that are
mixed in with the original signal, higher depth settings make the delayed copies louder than the original
signal.
18. ECHO DIGITAL MODULE OUTPUT LEVEL (LEVEL)
Controls the sound effects signal level that is provided by this module to the master output section of the
console. In the minimum position the output of this module is null canceling the effect.
19. USB GAIN CONTROL (USB LEVEL)
Controls the volume level of the included MP3 player.
20. MP3 PLAYER (USB INPUT)
Input connector for USB memory devices for the internal MP3 player. To control the player use the
included remote control.
21. MP3 PLAYER CONTROLS
: Play / pause; : Next track; : Previous track
22. IR
Infrared receiver for remote control.
A6M4/A8M4/A10M4
Содержание A6M4
Страница 8: ...P R O F E S S I O N A L A U D I O...
