Unihedron SQM-LU, Руководство пользователя

Страница: 26 / 30

Unihedron SQM-LU Users manual
8 Troubleshooting
Reading: too bright, too hot, inspect lens for IR filter.
Problem Cannot get a reading
Cause Driver is not installed or the SQM-LU is not connected
Solution For Windows, check that the unit is registered using the registry editor from the Start
menu, select Run, then type in
regedit
and press OK.
For Windows XP and Windows 2000, look here for your device
HKEY_LOCAL_MACHINE\
SYSTEM\
Enum\
FTDIBUS\
VPSerial_Number\
0000\
PortName
For Windows 98 and Windows ME, look here for your device
HKEY_LOCAL_MACHINE\
SYSTEM\
Enum\
FTDIBUS\
VPSerial_Number\
0000\
PortName
The Serial_Number is printed on the bottom of the unit.
The above will identify which COM port the SQM-LU has been assigned.
If the SQM-LU is plugged in, the active COM port will show up in this list:
HK_LOCAL_MACHINE\
HARDWARE\
DEVICEMAP\
SERIALCOMM
For Linux and Mac, use
lshal
to determine which device the FTDI driver has attached
the SQM-LU to. The CD contains a Perl script
findftdi.pl
to filter out the lshal
output.
Revision 1.1 Page 24 Last modified: Jun 18, 2011