Unihedron SQM-LU-DL, Руководство оператора

Страница: 45 / 101

7.5 Log Continuous
Figure 7.27: Log Continuously Trigger tab
To operate the continuous logging function:
1. Select the frequency of logging from the trigger tab.
2. Select if “Moon data” is to be computed and logged.
3. Select “Freshness” to identify Fresh/Stale results. This is useful when recording brightness from a moving platform,
specifically.
4. Select “Single .dat file” to prevent separate daily files being created each 24 hours.
5. Select “GoTo accessory” when the meter is mounted on a GoTo tripod and direction commands come from the
GoTo tab.
6. Select “Raw frequency” when the rFx command is desired which send the linear raw light reading frequency.
(Firmaware 75 and above).
7. Select a limit to the number of records. A value of zero is default and means there is no limit. Any other value
1-1000 means that UDM will stop recording after that many records have been taken.
8. Press the “Record” button. The records are stored in a logfile whose location is shown in the “Logfile name” area.
A new logfile is automatically created at the beginning of each day (at local time 0:00).
9. Press the “Stop” button when you want to stop the recording process.
10. Log files can be accessed by the “File : Open” menu selection or by pressing the “folder” button shown in the “Log
Continuously” screen.
11. Press “Close” when done with the continuous logging feature.
Threshold to record A threshold for recording readings can be set before starting recording. Any reading greater or
equal to this threshold value will be recorded in the log file.
Figure 7.28: Log Continuously Threshold
A threshold of 0 will allow all readings to be recorded.
The threshold indicator will turn green if the threshold of the triggered reading is met (recording) and red if the
triggered reading is below the threshold (no recording).
The threshold value is saved in the registry configuration file when it is changed. Changes can only be made while not
recording.
Unihedron SQM-LU-DL Operator’s Manual -
20220119
45