UniGuard Technology Limited
2
1.
Hardware Introduction
1.1. Buy one Sim Card and confirm the following details:
This sim card can be used to make call, send SMS, and gets GPRS function.
This sim card gets enough money for GPS tracking service.
This sim card gets caller ID display function, no call forwarding.
The SMS format should be text format, not PDU format. (Most countries use text format for SMS)
1.2 Please use the screw driver to open the GPS tracker, and Insert the sim card with the correct
direction(golden part faces down).
1.3 The first time you use this tracker, please charge the GPS tracker 12 hours, so that the battery can get a
good performance, Normally, it only takes 3-5 hours to charge battery fully. Because the battery in tracker is li battery,
so don
’t squeeze it illegally, or put it into fire. The normal standby time of battery is
100 hours.
1.4 Please use the power charger in standard kit to charge our GPS tracker.
2. Device Activation.
2.1
Bring GPS tracker to open air, and press power switch for 3 seconds, then you can see the indication light will be
on. Then GPS tracker will start to search GSM and GPS signal automatically.
2.2. According to the light status, user can judge the GPS tracker status. Once the GPS signal is ready, you can set
all functions in user manual.
1 Green LED light: GPRS
LED light status
Flash
GSM/GPRS Signal Ok
Normally on without flash
No GPRS signal
Off
GPS Tracker is off, or standby
2 Blue LED light: GPS
LED light status
Flash
GPS Signal Ok
Normally on without flash
No GPS signal
Off
GPS Tracker is off, or standby
3 Red LED light: Power
3. Administrator number setting(Master number setting)
3.1 Add admin phone number: (Default factory setting password:123456)
LED light status
Normally on without flash
Charging
Flash
Low battery
Off
Full battery
Power charger
SOS button
Power switch
Power connection pin
Metal clip
