UniGuard Technology Limited
11
GSM Signal: 1-32 (The higher digit it shows; the stronger of GSM signals it
receives.)
11.
Check IMEI
Send SMS "imei+password" to the unit. For example, Send SMS "imei123456"
to the tracker device, an IMEI number in 15 digits will be returned.
12. Terminal (local) Time Setting
Send SMS “time+space+zone+pspace+time” to the tracker unit, If
succeed, It will reply “time OK”. For example: Send SMS “time zone123456 8”, 8
is the time zone of China, If your time zone is minus, send SMS like
“time
zone123456 -
8”.
13. Monitor (Voice Surveillance)
14.1 The command to
switch between Track and Monitor are “tracker” and
“ monitor”.
1
4.2 The default mode is “track” (Track mode).
14.3 Send SMS “password” to the unit, and it will reply “monitor ok!” and
switch to “monitor” mode.
14.4 Send SMS “password” to the unit, it will reply “tracker ok!” and
restore to “track” mode
14. Data logging
14.1 Auto logging
：
When the tracker device lost GSM signals or fall offline from GPRS,
tracker will log the tracking position and alerts automatically in the SD card on the
basis of the pre-set condition, when GSM signals get back, all the event alerts
will be auto-sent to the authorized numbers or monitoring platform (server), but
the logged tracking data should be loaded to the monitoring platform via SMS
command.
14
.2 Logging upon times: Send SMS: “save0password” to the tracker unit, it
will
reply “save ok”, and will log the lat, long locations every 30 seconds for 5
times. (S: second, m: minute; h: hour).
14.3
Multi-logging
：
Send SMS:”save030s***n+password” to tracker device, it will reply
“save ok”.
14.4
Logging Clearance: send SMS: “clear+password” to tracker device, it will reply
“clear ok”.
14.5 Logging Volume: It depends on the capacity of the SD card inserted in the
tracker device.
