Configuration
10.
4.
CONFIGURATION
Configuration Dialog
The parameters that describe the input source can be configured by the
Capture Filter
Properties
dialog. The dialog contains three tabs: Windows standard
Video Decoder
tab, a
Video Proc Amp
tab and the
FG Properties
tab. All capture properties for UFG-05
can be configured through the
FG Properties
tab.
The controls on the
FG Properties
panel are divided to five functionality sections.
Please find below the description each section.
Input Source Type
You can select one of the three input types
Analog, Digital,
and
Video
with the radio
buttons in the
Input Source Type
section. In addition to that within each input type you
can define sub-types. For Analog and Digital you can select either RGB or YPbPr /
YCbCr. For Video you can select the four combinations between S-Video and
Composite and between PAL, NTSC and SECAM. The
Input Timing
section has a
unique appearance for each of the three input types.
When switching between the input types the last valid values in the
Input Source Type
and
Input Timing
sections will be restored.
