Unigraf UCD-2 VX1, Руководство пользователя

Страница: 9 / 23

9
Capture Process
UCD hardware blocks are described in the figure below. Simplified version of the capture
process is described as follows:
1. Set V-by-One color depth (6/8/10/12 bits /V-by-One byte mode)
2. Choose the desired number of V-by-One lanes to be captured.
3. Set color depth (8/16 bits) that is transferred over USB to PC. This setting affects data
amount i.e. preview frame rate. It does not need to be the same as V-by-One color
depth chosen in step 1.
4. Trigger capture start.
5. Video frames are saved to memory until memory is full.
6. Frames are readable one by one from the memory until memory is empty.
7. To continue, go back to step 4.