DATA ACQUISITION
23
Filtering
In the
Filters
drop down menu you can set up rules describing which data lines are shown in
the Transaction List. You can choose the data based on:
•
The type of data line
•
The origin of the message
•
The DPCD address range
In the
Filters
drop down menu you can find by default a set of pre-programmed filters.
The
Custom Filter
dialog provides you a possibility to add and modify new filters. The pre-
programmed filters are listed in the dialog. You can copy their structure as bases of your
custom filters. It is advisable not to modify the pre-programmed filters directly but make
copies of them.
In the
Stored custom filter
definitions panel you will have the list of currently defined Filters.
On the right hand side buttons you can define new Filters, rename or delete them. You can also
reorder their appearance in the
Filters
pull-down menu.
In the
Filter Rules
panel lower in the dialog you can review and change the
Rules
in the
selected
Filter
. By clicking
Add…
you can create new rules, clicking
Edit…
you can review
and edit existing Filters and by clicking
Remove
from the Filter definition.
When you click Add… or Edit…
Edit Filter Rule
dialog opens. In the dialog you can in detail
define the action of the rule, select the event and the event details.
You can get help by clicking
Help
. The “Help” text is attached to Appendix C of this
document.