Unigas TP1030, Инструкция по установке, использованию и обслуживанию

Страница: 33 / 60

CIB UNIGAS - M039168CC
33
Replacing the ignition electrode
To replace the ignition electrode, proceed as follows:
1 remove the burner cover
2 disconnect the electrode (E) cable (CE);
3 remove the combustion head (see par. “Removing the combustion head”);
4 loose screw (B) that fasten the ignition electrode (E) to the burner pilot (P);
5 remove the electrode and replace it, referring to the values quoted on Fig. 18;
ATTENTION: avoid the ignition electrode to contact metallic parts (blast tube, head, etc.), otherwise the boiler’s operation
would be compromised. Check the electrode position after any intervention on the combustion head.
P E CE B