Unigas PBY1025, Руководство по установке, использованию и обслуживанию

Страница: 7 / 119

C.I.B. UNIGAS - M039126CE
7
Performance Curves
To get the input in kcal/h, multiply value in kW by 860.
Data are referred to standard conditions: atmospheric pressure at 1013mbar, ambient temperature at 15°C
NOTE: The performance curve is a diagram that represents the burner performance in the type approval phase or in the laboratory
tests, but does not represent the regulation range of the machine. On this diagram the maximum output point is usually reached by adj-
suting the combustion head to its “MAX” position (see paragraph “Adjusting the combustion head”); the minimum output point is rea-
ched setting the combustion head to its “MIN” position. During the first ignition, the combustion head is set in order to find a
compromise between the burner output and the generator specifications, that is why the minimum output may be different from the Per-
formance curve minimum.
The burner is designed to work positioned according to the picture below. Set the upper side of the burner flange in a horizontal posi-
tion, in order to find the correct inclination of the pre-heater tank. For different installations, please contact the Technical Department.
Key
1 Burner flange (upper side indicated)
2 Bracket
3 Pre-heater tank on the burner
PRESSURE IN
COMBUSTION CH
AMBER (
m
bar)
PBY1025
kW
PBY1030
kW
PRESSURE
IN
COMBUSTION C
H
AMBER
(mbar
)
PBY1040
0
10
20
30
2500 3500 4500 5500 6500 7500 8500
0
4
8
12
16
20
24
28
32
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
0
10
20
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000
kW
SIDE UP
SIDE
DOWN
1
2
3