Unigas IDEA Series, Руководство пользователя, Страница: 10 / 48

PART I: INSTALLATION
10
MOUNTING AND CONNECTIONS
Packing
The burners are despatched in packages of dimensions 795 x 550 x 490 mm (W x H x D).
Packing cases of this kind are affected by humidity; the maximum number of cases to be stacked is indicated outside the
packing .
The following are placed in each packing case:
1 burner;
2 light oil flexible hoses;
1 light oil filter;
1 gasket to be inserted between the burner and the boiler;
1 envelope containing this manual.
To get rid of the burner’s packing and in the event of scrapping of the latter, follow the procedures laid down by current laws on
disposal of materials.
ATTENZIONE: LEGGERE SCRUPOLOSAMENTE LE AVVERTENZE RIPORTATE ALL’INIZIO DEL MANUALE.
Fitting the burner to the boiler
To perform the installation, proceed as follows:
1 fix 4 holes on the boiler’s door, according to the burner’s drilling plate described on
paragraph “Overall dimensions”;
2 place the gasket on the burner’s flange;
3 install the burner into the boiler;
4 fix the burner to the stud bolt, by means of the fixing nuts, according to Fig. 22.
5 After fitting the burner to the boiler, ensure that the gap between the blast tube and
the refractory lining is sealed with appropriate insulating material (ceramic fibre
cord or refractory cement).
Key
1 Burner
2 Fixing nut
3 Washer
4 Sealing gasket
5 Stud bolt
7 Blast tube
Fig. 22