c04.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
217
Nur für den internen Gebrauch
Phone Parameters - Administration
Maintenance
4.14
Maintenance
4.14.1
Remote trace
This area is applicable only when using the web interface.
4.14.2
Restart Phone
The regular phone restart, which retains the phone’s settings, is triggered by a special
Action
,
whose content is
Restart
. For further information, see Section 3.6.5, "Restart Phone".
4.14.3
Factory reset
This procedure resets all parameters to factory settings and reboots the phone. To start a fac-
tory reset, the
Action
has to be set to
Restart
, as with the regular phone restart. Additionally,
the special, fixed password must be provided in the
restart-password
item, and the
restart-type
item must be set to
FactoryReset
. See the following snippet:
<Item name="restart-password">124816</Item>
<Item name="restart-type">FactoryReset</Item>
4.14.4
HPT interface
WBM Name
Item name
Type
Values
Description
Remote Trace
Status
remote-
trace-enable
Bool
true
/
false
Default:
false
If enabled, syslog server
will be used for remote
trace.
User Notification
remote-
trace-user-
notify
Bool
true
/
false
Default:
false
If enabled, the user gets a
notification
Remote Server
IP
remote-
trace-ip
IP Num-
ber
Default: Null
Defines IP address of Re-
mote Server
Remote Server
Port
remote-
trace-port
Port
Number
Default: 514
Defines port number of
Remote Server
WBM Name
Item name
Type
Values
Description
Disable HPT
enable-test-
interface
Bool
true
/
false
Default:
true
Used to disable test inter-
face.