Unify OpenStage WL 3, Руководство пользователя

Страница: 83 / 132

c10_WL3.fm
Menu Operation
Messaging
A31003-M2000-U107-1-7619, 1/2017
WL3 and WL3 Plus WLAN Handset, User Manual
83
The first character entered is always upper-case, followed by lower-case
character. However, this may be overriden by pressing the * -key before entering
the character.
When pressing a key, the first available character for that key is displayed, see
3.1.1 Alphanumeric Keys
. To enter the other characters supported by the key, press
the key until that character appears in the display.
The keys 0-9, * or # can be used. Keys 0 and 1 contains special characters, see
3.1.1 Alphanumeric Keys
to see all characters.
For example, to enter the character E, press key 3 twice. "E" appears in the
display and is selected after a timeout or when another key is pressed.
TIP: If the system supports UTF-8 character encoding, the input language can be
changed temporarily by long pressing
. This can be used to temporarily
access characters in a foreign language.
To delete a character, press "Clear".
To construct and send a message, perform the following steps:
1. Press “Menu”.
2. Select “Messaging” (see
10.4 Messaging
on page 78).
3. Select “Write new message”.
4. Write the message from scratch or select a message template by pressing the
"More" soft key and, if required, edit the message as described in
10.4.2.1 The
Templates Menu
on page 82.
5. When the message is complete, press "Send".
TIP: A message can be saved and sent later by pressing the Soft Key “Back”
and select “Yes”. The message is stored under Unsent messages. See
10.4.4
Unsent Messages
on page 83.
6. Enter the call number, or press middle Soft Key to get the number from
contact list.
7. Press "Send".
10.4.4 Unsent Messages
1. Press “Menu”.
2. Select “Messaging” to view the message list.
3. Select “Unsent” to view the list.
NOTE: The "More" key is not displayed if no message templates have been defined.