Unify OpenStage WL 3, Руководство пользователя

Страница: 62 / 132

Alarm Operation
c08_WL3.fm
Man-down and No-movement Alarm
A31003-M2000-U107-1-7619, 1/2017
62 WL3 and WL3 Plus WLAN Handset, User Manual
The handset alerts by beep, vibrator, and LED signals, depending on the settings,
during a predefined period of time (default 7 seconds). At the same time, the
handset displays the message “Man-down warning. Cancel?“ or “No-movement
warning. Cancel?“.
The handset then sends the alarm, unless the alarm is cancelled. The handset
confirms that the alarm has been sent by beep, vibrator, and LED signals. In
addition, the handset displays the message “Man-down warning sent“ or “No-
movement warning sent“.
The handset location is sent along with the alarm, see
8.6 Alarm with Additional
Information
on page 63.
If configured in the Device Manager, an Acoustic Location Signal (ALS) is
activated after the alarm has been sent, see
8.5 Automatic Call after Alarm
on page
63.
The handset can be programmed to automatically call a predefined telephone
number after the alarm has been sent, see
8.5 Automatic Call after Alarm
on page
63.
The Man-down and No-movement alarm functions are inactive under the
following conditions:
• While the handset is placed in a charger.
• During calls (depending on settings), to avoid false alarms if the user tilts the
handset, or is motionless during a call.
• For a predefined period of time (default 10 minutes) if the Mute button is pres-
sed during the alert signal.
8.4.1 Activate/Deactivate the Man-down and/or No-
movement Alarm
Enter “Settings” , and step to “Alarm”.
Then select the wanted alarm(s) and press Back repeatedly.
The corresponding icon(s) appear on the display.
Follow the same steps to deactivate the alarm(s).
8.4.2 Cancel Man-down and No-movement Alarm
Press the soft key “OK“ to confirm “Man-down warning. Cancel?“ or “No-
movement warning. Cancel?“, which appears in the display during the alert signal
or press any key.