Unify OpenScape WLAN Phone WL4 Скачать руководство пользователя страница 57

Страница: 57 / 83

Menu Operation

Edit Profile

In the opened

Profiles

menu, select a profile from the list.

Press

More

Edit

Select the setting to be changed and press

Edit

Press

Back

to save changes.

System Profiles

NOTICE:

Applicable to OpenScape WL4 Plus only.

A system profile can be used when certain settings are required to be set on a handset but are

not allowed to be changed by the user. When the system profile is activated, the settings are not

displayed in the handset’s menu. The system profile name is displayed when the handset is in

Idle mode. For more information, refer to the Configuration Manual, Unify OpenScape WLAN

Phone WL4.
The system profile can be used in combination with the user profile, refer to the

Profiles

on page

56. If there is a conflict between the settings in the system profile and the settings in the user

profile, the settings in the system profile are used.
If a user changes a setting in the handset menu that is determined by a system profile, the

changes will be not applied.
For example, the

Figure 8: System Profile Overrides Settings Changed by the User

on page

57 shows that a system profile has been activated under the name

Sys Profile SK1

. In

this case,

Inbox

and

PTT 4

soft key functions are determined by the system profile settings. If a

user attempts to change, for example, the name of these functions using the handset menu, the

changes will not be applied. Changes will be applied only in case if the system profile is deacti-

vated.

Figure 8: System Profile Overrides Settings Changed by the User

System Profile Status Indications

The system administrator can configure the handset to play a sound if the system profile is

activated or deactivated. This provides the user with an audible alert when the system profile

changes from inactive to active or vice versa.
The feature can be triggered by several kinds of events, such as moving between different parts

of a buildings where a system profile might be appropriate in one location but not required in an-

other. The user should be aware that the characteristics and behavior of the handset change

when the system profile changes.

A31003-M2000-U109-01-7619, 29/04/2020

OpenScape WLAN Phone WL4, User Manual

Содержание OpenScape WLAN Phone WL4




















































































Результаты поиска

Содержание OpenScape WLAN Phone WL4

Отзывы:

Похожие инструкции для OpenScape WLAN Phone WL4

Бренды по названию

Популярные бренды

Unify OpenScape WLAN Phone WL4, Руководство пользователя

Результаты поиска

Содержание OpenScape WLAN Phone WL4

Отзывы:

Похожие инструкции для OpenScape WLAN Phone WL4

Бренды по названию

Популярные бренды