7
8. Connection
–
disconnection
The machine is constructed for connection to tractor hydraulic lift or loader, connected
to tractor hydraulic lift.
8.1 Connection on a tractor
To tractor hydraulic lift
Move the tractor to the three
–
point connection of the pliers for timber, until the bolts
of the three
–
point connection and the bolt holes on the lower liftable crossbars on
a
tractor
do
not
match.
Be aware of the thing, that between the tractor and pliers for timber are not located
any
persons.
Insert
the
bolts
in
the
holes
and
secure
them
with
tractor
pin.
The tractor must be switched off, when the driver switches control lever on hydraulics.
Set up upper lever 1 to the desired length and fasten and secure him on the upper
part of the three
–
point connection (Figure 1). Connect hydraulic lines on a tractor.
Move
support
leg
3
in
transport
position
(figure
2).
