10
9.2 Angular setting between tractor arms and controlling pole
Pliers are designed to draw trunks and occasionally loading. According to the purpose of
use, it is necessary to adjust the height of fasten the tractor arms on pliers as well as upper
steering lever of the three
–
point connection.
•
When you want to use pliers to draw trunks, set the tractor arms 1 and upper
steering pole 2 parallel, as much as possible (Figure 5).
•
But if you want to load with pliers, then the angle between tractor arms 1 and
upper steering pole 2 should be as bigger as it can (Figure 6).
