Page
16
of
19
email: [email protected]
Copyright 2017 Unifire
8
Testing the System
To test the system follow these steps:
1.
Apply power to the “eHEnergizer”.
2.
Verify that the red LED turns on.
3.
After a short delay and Audible sparking noise “snap” will be heard from the igniter tip.
4.
If visible, the igniter tip will appear as a very bright, strong flashes of white light.
5.
The unit will continue to spark at a frequency of 2 sparks per second for 20 seconds.
6.
The sparking then pauses for 10 seconds.
7.
Sparking resumes for another 20seconds until removal of power.
On removal of power, if power is again applied quickly (<1-2 seconds) the unit will remain in the 10 second
delay period.
