Uniel UTV-95, Инструкция по эксплуатации

Страница: 8 / 10

EN 8
UTV-95
5. Press MODE on the display will start flashing digit indicating in what time
will start activated snooze (from 1 minute to 20 minutes);
6. Press MODE to return to the normal display mode.
In normal display mode, Press MODE, AL will be shown on the display, press
UP to turn on or turn off the alarm.
Pressing SNOOZE/LIGHT during the system activation will switch on the
snooze.The snooze signal will be repeated (default) every 8 minutes unless it
is previously deactivated with any button (except for SNOOZE/LIGHT ).
• WEATHER FORECASTS AND MOON PHASES
This unit is capable of detecting outdoor temperatures and humidity chang -
es. Based on collected weather data, it forecasts the weather for the next 12
to 24 hours as next icons:
SUNNY - , SLIGHTLY CLOUDLY - , CLOUDED - , RAINLY - )
Note: The weather forecast accuracy is approximately 70%. The weather
station shows the forecasted (predicted), not the current conditions.
Note2: The SUNNY icon indicates clear weather, even when in the night-time.
Temperature and humidity are measured automatically and don’t need to
operate. If display incorrect check/replace the batteries. Place the sensor away
from any possible sources of heat/cold.
The display show “LL” instead number values when the temperature or hu -
midity is lower than the range of values set in the unit.
The display show “HH” instead number values when the temperature or
humidity is higher than the range of values set in the unit.
The station displays also relevant moon phases.
• Signal reception channel
UP button can be used to set the sensor the signal is received from. Chan -
nels 1,2 or 3 can be set subsequently.
• Comfort level indicator
Depending on weather conditions in the room, the weather station may dis -
play what follows:
- comfort

(humidity range 40% - 70%, indoor temperature 20°C - 28°C);
- dry

(humidity below 40%) – unfavorable conditions;
- humid

(humidity over 70%) – unfavorable conditions.
• Minimum and maximum temperature and humidity indications
1. Press MAX/MIN button to display the highest outdoor/indoor temperatures
and humidity, (from the last weather station resetting). MAX caption will be
displayed at the temperatures and humidity;
2. Press MAX/MIN button again to display the lowest outdoor/indoor tempera -
tures and humidity, MIN caption will be displayed;
3. Press MAX/MIN button again to come back to displaying the current tem -
peratures and humidity or wait 7-8 seconds until the weather station auto -
matically returns to displaying current indications. Max and Min symbols will
disappear.
• SELECTING THE TEMPERATURE DISPLAY UNIT (°C/°F)
Press DOWN to set the required temperature unit: degrees Celsius or de -
grees Fahrenheit (°C/°F).
• SPECIFICATION
Main unit:
Indoor temperature measuring range: -9.9°C to 50°C (14 °F to 122°F)
Outdoor temperature measuring range: -40°C to 60°C (-40°F to 140°F)
Tolerance/accuracy of temperature measurement: +/- 1.1°C (+/-2°F)
Humidity measurement range: 20% ~ 90%
Accuracy of humidity measurement: +/-5%
Batteries: 2x1.5V / AAA (LR03 )
Size: 128 * 90 * 58 mm
Weight: 130 g
Wireless sensor:
Distance of open air transmission: 30 m max.
Frequency band: 433 MHz
Temperature measurement range: -40°C do 60°C (-40°F do 140°F)
Tolerance/accuracy of temperature measurement: +/- 1.1°C (+/-2°F)
Batteries: 2x1.5V / AAA (LR03 )
Size: 93 * 60 * 23 mm
Weight: 62 g
• PACKAGING CONTENT
1. Wireless weather station
2. Single wireless sensor
3. Instructions for Use