Uniel UTV-82, Инструкция по эксплуатации

Страница: 17 / 20

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
RU 16 UTV 82 RU 17
To set the time zone, make sure the display shows the time with the ZONE icon. Then
press and hold MODE .
Press UP (▲) or DOWN (▼) to adjust value in steps of 30 min. Press and hold either
button for fast advance. Press MODE to confirm your selection.
SELECT THE CLOCK/CALENDAR DISPLAY
Each time you press MODE , you may rotate from one of the following displays to the
next:
- Hour: Minute: Second
- Hour: Minute: Weekday
- Hour: Minute: Weekday of the Time Zone
- Hour: Minute: Second of the Time Zone
- Day: Month
• WAKE-UP ALARM FUNCTION
There are three time alarms available on the main unit:
* Weekday Alarm
The alarm sound will be activated and the icon will flash on weekdays (Mo-Fr) when it
is armed and the alarm time is reached.
* Single Alarm
The alarm sound will be activated and the icon will flash when it is armed and the alarm
time is reached. Once it finished, it will be disabled automatically
* Pre-Alarm
The pre-alarm will be activated and the icon will flash if the temperature of channel 1 is
falling to +0 ºC or below.
It is programmable 15, 30, 45, 60 or 90 minutes earlier than the weekday alarm or single
alarm time.
ACTIVATING / DEACTIVATING THE TIME ALARMS
1. Press ALARM to rotate between:
- Weekday Alarm Time (displays OFF if weekday alarm deactivated)
- Single Alarm Time (displays OFF if single alarm deactivated)
- Pre-Alarm Time (displays OFF if pre-alarm deactivated)
2. When the above alarms are displayed, pressing UP (▲) will activate, pressing
DOWN (▼) will deactivate the corresponding alarm.
Note: Press MODE anytime during above alarm selection mode to return to normal clock
display.
SETTING THE TIME ALARMS
1. Press ALARM to select the alarm which you wish to configure.
2. Press and hold ALARM until hour starts flashing in the display
3. Set Alarm Hour:
Press UP (▲) or DOWN (▼) to adjust. Press and hold either button for fast changes.
Press ALARM to confirm your selection.
4. Set Alarm Minutes:
Press UP (▲) or DOWN (▼) to adjust. Press and hold either button for fast changes.
Press ALARM to confirm your selection
5. Upon completion the display will be returned to the alarm selection screen.
Note: Pre-alarm cannot be activated if weekday alarm or single alarm is not enabled.
STOP THE ALARM SOUND
The alarm will sound for 2 minutes with increasing intensity.
To stop it, press ALARM during the Alarm Sound to disable the alarm.
Note: For weekday alarm, pressing ALARM will only disable the alarm for the current
day. The alarm will be activated again the next day (if it falls within Monday to Friday).
If the Alarm is not interrupted by pressing the ALARM key while the sound is active, it
will repeat itself after 8 minutes for 3 times. If you want to stop the alarm in one of the 8
minute periods, you have to do as described in “Activating/Deactivating the Time Alarms”.
• TROUBLESHOOTING
In case of a malfunction, always check the batteries and replace them in the main unit
and in the sensor(s) with new ones.
Please also check below issues before contacting customer service.